Soru 1:
Bu sorunun cevabi yanlis cunku;
-Switchin her portu ayri bir collision domaindir.
-Her vlan switch uzerinde ayri bir broadcast domain olusturur.
-Her hub bir collision domaindir.
Yukaridaki kurallari dikkate alirsak,soruda hub yerine uzerinde sadece bir vlan tanimli switch koyarsak ne olur diyor.Bu durumda tek vlan oldugu icin broadcast domain sayisi ayni kalir ancak hub yerine switch konuldugundan (switchin her bir kolu ayri bir collision domaindir) collision domain sayisi artar.D secenegi dogrudur ancak C secenegi yanlis.Sinavda C seceneginin yerine su sekilde bir cevap aramamiz gerekir;
The number of collision domain would increase .
Soru 2:LAB
After adding P4S2 router, no routing updates are being exchanged between P4S1 and P4S2. All other inter connectivity are woking properly. The task is to indentify the fault(s) and correct the router config to provide full conectivity between the routers. All passwords on all routers is Cisco. Ip address in the pics below :
Gordugunuz gibi P4S1 ve P4S2 routerlarinda AS numaralari farkli.Ilk olarak AS numaralarini duzeltmemiz gerekir;
P4S2(config)#no router eigrp 22
P4S2(config)#router eigrp 212
P4S2(config-router)#no auto-sum
P4S2(config-router)#net 192.16.60.0
P4S2(config-router)#net 192.16.77.0
P4S2(config-router)#end
P4S2#copy run start
P4S1 routerinda 192.168.77.0 network u duyurulmamis,simdi sira bu networku eigrp ile duyurmakta;
P4S1(config)#router eigrp 212
P4S1(config-router)# net 192.168.77.0
P4S1(config-router)#end
P4S1# copy run start
Son olarak “show ip route ” komutuyla routing table kontrol edilir.
